Cisco 9971 - Page 88

Cisco Unified IP Phone 9971 Wireless LAN Deployment Guide
88
• Below lists the available security modes supported and the key management and encryption types that can be used for
each mode.
Security Mode
802.1x Type
Key Management
Encryption
Open
N/A
None
None
Open with WEP
N/A
Static
WEP (40/64 or 104/128 bit)
Shared Key
N/A
Static
WEP (40/64 or 104/128 bit)
LEAP
LEAP
802.1x, WPA, WPA2
TKIP, AES, WEP (40/64 or
104/128 bit)
EAP-FAST
EAP-FAST
802.1x, WPA, WPA2
TKIP, AES, WEP (40/64 or
104/128 bit)
AKM
N/A, LEAP
802.1x, WPA, WPA2,
WPA-PSK, WPA2-PSK
TKIP, AES, WEP (40/64 or
104/128 bit)
• Open with WEP and Shared Key security modes require that the static WEP settings be entered.
Key Style
Key Size
Characters
ASCII
40/64 bit
5
ASCII
104/128 bit
13
HEX
40/64 bit
10 (0-9, A-F)
HEX
104/128 bit
26 (0-9, A-F)
• The AKM security mode is an auto authentication mode that can use either LEAP for 802.1x authentication or WPA
Pre-Shared Key.
• If using Pre-Shared key, enter the ASCII or hexadecimal formatted key.
Key Style
Characters
ASCII
8-63
HEX
64 (0-9,A-F)
• AKM mode requires a key management type to be enabled on the Access Point.
For 802.1x authentication methods, WPA, WPA2 or CCKM is required.
For non-802.1x authentication, WPA-PSK or WPA2-PSK is required.
• If using Open with WEP or Shared Key for the security mode, enter the static WEP key information that matches the
access point configuration.