Cisco Aironet 1200 Series - Page 4

Contents
iv
Cisco Aironet 1200 Series Access Point Hardware Installation Guide
OL-8370-04
Warnings 2-2
Unpacking the Access Point 2-3
Package Contents 2-3
Basic Installation Guidelines 2-4
Controller Discovery Process for Lightweight Access Points 2-4
Before Beginning the Installation 2-5
Deploying the Access Points on the Wireless Network 2-7
Connecting the 2.4-GHz Antennas 2-8
Connecting the 5-GHz External Antennas 2-8
Connecting the Ethernet and Power Cables 2-9
Connecting to an Ethernet Network with an Inline Power Source 2-10
Connecting to an Ethernet Network with Local Power 2-10
CHAPTER 3 Mounting Instructions 3-1
Overview 3-2
Mounting on a Horizontal or Vertical Surface 3-3
Mounting Below a Suspended Ceiling 3-4
Mounting Above a Suspended Ceiling 3-5
Attaching the Access Point to the Mounting Bracket 3-8
Securing the Access Point to the Mounting Bracket 3-8
CHAPTER 4 Upgrading the 2.4-GHz Radio 4-1
Upgrade Overview 4-2
Unpacking the Radio 4-2
Opening the Access Cover 4-3
Removing a Blank Spacer Card 4-4
Removing a 2.4-GHz Radio 4-5
Installing a 2.4-GHz Radio 4-7
Attaching the Compliance Labels 4-9
Placing the Labels 4-10
CHAPTER 5 Upgrading the 5-GHz Radio Module 5-1
Upgrade Overview 5-2
Unpacking the Radio Module 5-2
Removing the 5-GHz Radio Access Cover 5-2
Removing a 5-GHz Radio Module 5-3