Cisco Aironet 1530 Series, 1532 - Page 53

2-21
Cisco Aironet 1530 Series Outdoor Access Point Hardware Installation Guide
OL-30864-01
Chapter 2 Installing the Access Point
Mounting the Access Point
Figure 2-11 Exploded View of the Pivoting Mounting Kit
Table 2-4 Materials Needed to Mount the AP on a Vertical Pole with the Pivoting Mounting Kit
1
2
3
4
5
1 90.0 mm M8 screw 2 M8 washer
3 M8 spring washer 4 M8 nut
5 80.0 mm M8 screw with washer and spring
washer
Materials Required In Kit
Ground lug and screws (provided with access point) Yes
Pivoting mount kit and hardware Yes
(8) M6 x 12-mm Hex-head Bolts Yes
Adapter bracket for option horizontal mount Yes
Two stainless steel band clamps (adjustable 2"-5", 51 mm -
127 mm)
Yes
Two stainless steel band clamps (adjustable 5"-8", 127 mm -
203 mm)
Yes