x
Cisco AS5350 and Cisco AS5400 Universal Gateway Software Configuration Guide
OL-3418-02 B0
Organization and Use
Organization and Use
The following details where you can find your basic and advanced configuration information:
• Chapter 1—Get familiar with your Cisco AS5350 or Cisco AS5400, learn how to use the
command-line interface (CLI), and upgrade your Cisco IOS software, if necessary.
• Chapter 2—Analyze your system, execute basic tasks and system configuration.
• Chapters 3 and 4—Begin to commission the Cisco AS5350 or Cisco AS5400 using the
command-line interface (CLI).
• The remaining chapters and appendixes—Reference these for your additional configuration,
management, and troubleshooting needs.
To obtain advanced feature-configuration information that is supported on your Cisco AS5350 or
Cisco AS5400 universal gateway, you can go to the following locations:
• Cisco AS5350 or Cisco AS5400 platform website, which includes platform-specific documentation
such as hardware books and release notes
–
Cisco AS5350 (or Cisco AS5400) Universal Gateway Chassis Installation Guide
–
Cisco AS5350 (or Cisco AS5400) Universal Gateway Card Installation Guide
–
Cisco AS5350 (or Cisco AS5400) Universal Gateway Regulatory Compliance and Safety
Information
Note The Cisco AS5350 and Cisco AS5400 platform websites are available online at
http://www.cisco.com/univercd/cc/td/doc/product/access/acs_serv/as5350/index.htm and
http://www.cisco.com/univercd/cc/td/doc/product/access/acs_serv/as5400/index.htm
–
Monitoring Voice and Fax Services on the Cisco AS5400 Universal Gateway, available at
http://www.cisco.com/univercd/cc/td/doc/product/software/.
Select your Cisco IOS release and search for this title.
• Cisco Technical Assistance Center website for the Cisco AS5350 and Cisco AS5400 universal
gateways, available at
http://www.cisco.com/pcgi-bin/Support/PSP/psp_view.pl?p=Hardware:AS5350
and
http://www.cisco.com/pcgi-bin/Support/PSP/psp_view.pl?p=Hardware:AS5400
Chapter 6 Configuring Voice over IP Provides a brief overview of the VoIP call
process and explains how to configure
VoIP on your gateway.
Appendix A Using the Setup Script Describes how to power on the gateway
and configure it using the prompt-driven
setup script.
Appendix B ROM Monitor Describes how to use theROM monitor to
isolate or rule out hardware problems
encountered when installing your gateway.
Appendix C Comprehensive Configuration Examples Provides basic and advanced configuration
examples for reference.
Table 1 Document Organization (continued)
Chapter Title Description
To Next Page
Loading...
