IN-1
Cisco AS5350 and Cisco AS5400 Universal Gateway Software Configuration Guide
OL-3418-02 B0
INDEX
A
aaa authentication login default local command 3-5, 3-29
aaa authentication ppp default if-needed local
command
3-5
aaa new-model command 3-4, 3-29
alarms
commands
facility-alarm detect controller
4-11
facility-alarm detect fan 4-11
facility-alarm detect interface 4-11
facility-alarm detect modem-board 4-11
facility-alarm detect rps 4-11
facility-alarm detect temperature 4-11
show facility-alarm command 4-11
configuring 4-10
failure events 4-10
status 4-11
alias command B-3
asynchronous group interface
configuring
3-7
grouping 3-7
group-range command 3-7
show async status maps command 3-8
show interface async command 3-7
verifying 3-7
B
banner login command 3-5
boot command B-4
booting, ROM monitor B-4
break key (interrupt) B-1
Building Integrated Timing Supply (BITS) 3-31
C
call-admission control 6-18
call legs 6-2
call spikes 6-18
call thresholds 6-18
call volumes 6-18
call volumes, high 6-18
card
See trunk card or universal port card
caution symbol, meaning of
xiv
channelized CE1 3-9
channelized CT1 3-9
channelized CT3 3-11
channelized E1 or T1
show controller e1 command
3-10, 3-12
show controller t1 command 3-10, 3-12
Cisco IOS File System 1-3
Cisco IOS software
about
1-6
command modes 1-7
enable mode 1-7
getting help 1-6
saving configuration changes 1-10
undo command 1-9
undo feature 1-9
clear port log command 5-3
clear spe counters command 5-3
clear spe log command 5-3
CLI, see command line interface
clocking
To Next Page
Loading...
