3-42
Cisco AS5350 and Cisco AS5400 Universal Gateway Software Configuration Guide
OL-3418-02 B0
Chapter3 Basic Configuration Using the Command-Line Interface
Where to Go Next
Where to Go Next
At this point you can go to:
• Chapter 4, “Continuing Configuration Using the Command-Line Interface” to continue system
configuration of basic features.
• Chapter 5, “Managing and Troubleshooting the Universal Port Card” to configure, manage, and
troubleshoot universal-port-card connections on your gateway.
• Appendix C, “Comprehensive Configuration Examples.”
• Monitoring Voice and Fax Services on the Cisco AS5400 Universal Gateway, available online at
http://www.cisco.com/univercd/cc/td/doc/product/software/. Select your Cisco IOS release and
search for this title.
Tip The following publications are available on the Documentation CD-ROM that came with your gateway
or on the World Wide Web from the Cisco home page, or you can order printed copies.
• For additional basic configuration information, refer to Cisco IOS Dial Technologies Configuration
Guide and Cisco IOS Dial Technologies Command Reference, available online at
http://www.cisco.com/univercd/cc/td/doc/product/software/ios122/122cgcr/index.htm. For more
advanced configuration topics, refer to the Cisco IOS software configuration guide, feature
modules, and command reference publications that pertain to your Cisco IOS software release.
• For information on available software features available on your Cisco IOS release, refer to the
software-configuration documents available online at
http://www.cisco.com/univercd/cc/td/doc/product/access/acs_serv/as5400/index.htm
• For Cisco AAA-based security information, refer to the Cisco AAA Implementation Case Study,
available online at
http://www.cisco.com/univercd/cc/td/doc/cisintwk/intsolns/aaaisg/index.htm
• For troubleshooting information, refer to the System Error Messages and Debug Command
Reference publications.
To Next Page
Loading...
