1-14
Cisco AS5350 and Cisco AS5400 Universal Gateway Software Configuration Guide
OL-3418-02 B0
Chapter 1 Understanding Basic Hardware Architecture and CiscoIOS Software
Where to Go Next
Where to Go Next
At this point you should go to:
• Chapter 2, “Verifying Basic Setup” to analyze your system and execute basic tasks and system
configuration before configuring the Cisco AS5350 or Cisco AS5400 universal gateway using the
CLI. To commission is to systematically execute basic configuration tasks that prepare your system
for data call processing.
Tip The following publications are available on the Documentation CD-ROM that came with your gateway,
or on the World Wide Web from the Cisco home page.
• Cisco IOS publications Dial Solutions Configuration Guide and Dial Solutions Command Reference
provide additional basic-configuration information. For more advanced configuration topics, refer
to the Cisco IOS software configuration guide, feature modules, and command reference
publications that pertain to your Cisco IOS software release.
• Check Configuring Selected 12.1 Cisco IOS Software Features, available online at
http://www.cisco.com/univercd/cc/td/doc/product/access/acs_serv/as5400/index.htm
• For troubleshooting information, refer to the System Error Messages and Debug Command
Reference publications.
To Next Page
Loading...
