Cisco AS5350 - Universal Access Server - Health Monitor

5-22
Cisco AS5350 and Cisco AS5400 Universal Gateway Software Configuration Guide
OL-3418-02 B0
Chapter5 Managing and Troubleshooting the UniversalPort Card
Health Monitor
Health Monitor
The Health Monitor allows you to see the status of different components of the AS5400:
The show health-monitor summary command shows the status of the following components:
• Chassis: Power supply, Temperature, Fans
• Memory: Processor, I/O Memory
• DFC: CT3, E1, T1, NP108
The show health-monitor summary command provides high level component status.
The show health-monitor command shows more details such as the status of sub components.
The following example shows the display output of the show health-monitor command:
AS5400#show health-monitor
Chassis:
Power Supply Failure
Redundant Power System is present.
PS Input Voltage status: failure
PS Output Voltage status: failure
PS Fan status: normal
PS Thermal status: normal
PS OverVoltage status: normal
Temperature OK
Fans OK
Memory:
Free Memory processor OK
Memory Fragmentation Processor OK
Free Memory I/O OK
Memory Fragmentation I/O OK
Detailed summary:
Head Total(b) Used(b) Free(b) Lowest(b) Largest(b)
Processor 62EC07E0 219412512 67221920 152190592 142181548 139874020
I/O 40000000 67110380 46387964 20722416 20722416 20706928
DFC's:
Slot 1 (NP108 DFC) OK
Slot 2 (NP108 DFC) OK
Slot 3 (NP108 DFC) OK
Slot 4 (NP60 DFC) OK
Slot 5 (NP108 DFC) OK, 1 SPE's BAD
Slot 7 (CT3 DFC) OK
AS5400#
AS5400#
AS5400#
AS5400#
AS5400#show health-monitor summ
AS5400#show health-monitor summary ?
| Output modifiers
<cr>
The following example shows the display output of the show health-monitor summary command:
AS5400#show health-monitor summary
Chassis:
Power Supply Failure
Temperature OK
Fans OK
Memory: