Cisco AS5350 - Universal Access Server - Page 171

-5
Cisco AS5350 and Cisco AS5400 Universal Gateway Software Configuration Guide
OL-3418-02 B0
Appendix
ROM Monitor Commands
enter rate:0 = 9600, 1 = 4800, 2 = 1200, 3 = 2400
4 = 19200, 5 = 38400, 6 = 57600, 7 = 115200 [0]:
change the boot characteristics? y/n [n]:
Configuration Summary
(Virtual Configuration Register:0x0)
enabled are:
break/abort has effect
console baud:9600
boot:the ROM Monitor
do you wish to change the configuration? y/n [n]:
• cont [-b]—Continues a loaded image that has stopped. The -b option sets the requested break points
before continuing.
For example:
reboot >
monitor: command “launch” aborted due to user interrupt
diagmon 7 > cont
reboot>
• context—Displays the CPU context at the time of the fault. The context from kernel mode and
process mode of a booted image is displayed, if available.
For example:
rommon 6 > context
CPU Context:
d0 - 0x00000028 a0 - 0x0ff00420
d1 - 0x00000007 a1 - 0x0ff00000
d2 - 0x00000007 a2 - 0x02004088
d3 - 0x00000000 a3 - 0x020039e6
d4 - 0x00000000 a4 - 0x02002a70
d5 - 0x02003e8a a5 - 0x02003f17
d6 - 0x00000000 a6 - 0x02003938
d7 - 0x00000001 a7 - 0x0200392c
pc - 0x02004adc vbr - 0x02000000
• cookie—Displays the contents of the cookie PROM in hexadecimal format.
For example:
rommon 1 > cookie
cookie:
00 01 01 31 03 15 03 20 00 14 33 01 30 11 4a 41
42 30 33 35 31 30 37 38 32 00 00 00 00 00 13 63
0c 1d 00 00 00 00 11 11 22 22 33 33 44 44 55 55
66 66 77 77 88 88 99 99 00 00 11 11 22 22 33 33
ff 00 30 96 f8 00 7a ff ff ff ff ff ff ff ff ff
ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff