Cisco ASA 5585-X Cli Configuration Guide

1-19
Cisco ASA Series CLI Configuration Guide
Chapter 1 Configuring SNMP
Configuring SNMP
• Sends traps (event notifications) to NMSs.
To enable the SNMP agent and identify an NMS that can connect to the SNMP server, enter the following
command:
Command Purpose
snmp-server enable
Example:
hostname(config)# snmp-server
enable
Ensures that the SNMP server on the ASA or ASASM is enabled. By default, the
SNMP server is enabled.

Cisco ASA 5585-X Specifications

General

Firewall Throughput	up to 20 Gbps
Maximum VPN Peers	10, 000
IPS Throughput	up to 10 Gbps
Maximum Concurrent Connections	10, 000, 000
Security Contexts	250
Interfaces	8 x 10 Gigabit Ethernet
Connections Per Second	350, 000
Power Supply	Dual, hot-swappable