Cisco ASA 5585-X Cli Configuration Guide

CHAPTER
1-1
Cisco ASA Series CLI Configuration Guide
1
Completing Interface Configuration
(Transparent Mode)
This chapter includes tasks to complete the interface configuration for all models in transparent firewall
mode.
This chapter includes the following sections:
• Information About Completing Interface Configuration in Transparent Mode, page 1-1
• Licensing Requirements for Completing Interface Configuration in Transparent Mode, page 1-3
• Guidelines and Limitations, page 1-5
• Default Settings, page 1-7
• Completing Interface Configuration in Transparent Mode, page 1-7
• Turning Off and Turning On Interfaces, page 1-19
• Monitoring Interfaces, page 1-19
• Configuration Examples for Interfaces in Transparent Mode, page 1-20
• Feature History for Interfaces in Transparent Mode, page 1-21
Note For multiple context mode, complete the tasks in this section in the context execution space. Enter the
changeto context name command to change to the context you want to configure.
Information About Completing Interface Configuration in
Transparent Mode
This section includes the following topics:
• Bridge Groups in Transparent Mode, page 1-2
• Security Levels, page 1-2

Cisco ASA 5585-X Specifications

General

Firewall Throughput	up to 20 Gbps
Maximum VPN Peers	10, 000
IPS Throughput	up to 10 Gbps
Maximum Concurrent Connections	10, 000, 000
Security Contexts	250
Interfaces	8 x 10 Gigabit Ethernet
Connections Per Second	350, 000
Power Supply	Dual, hot-swappable