Cisco ASA 5585-X Cli Configuration Guide

1-12
Cisco ASA Series CLI Configuration Guide
Chapter 1 Configuring RIP
Feature History for RIP
Feature History for RIP
Table 1-1 lists each feature change and the platform release in which it was implemented.
Table 1-1 Feature History for RIP
Feature Name Releases Feature Information
RIP support 7.0(1) Support was added for routing data, performing
authentication, and redistributing and monitoring routing
information using the Routing Information Protocol (RIP).
We introduced the route rip command.
Clustering 9.0(1) For RIP, bulk synchronization, route synchronization, and
layer 2 load balancing are supported in the clustering
environment.
We introduced or modified the following commands: show
route cluster, debug route cluster, show mfib cluster,
debug mfib cluster.

Cisco ASA 5585-X Specifications

General

Firewall Throughput	up to 20 Gbps
Maximum VPN Peers	10, 000
IPS Throughput	up to 10 Gbps
Maximum Concurrent Connections	10, 000, 000
Security Contexts	250
Interfaces	8 x 10 Gigabit Ethernet
Connections Per Second	350, 000
Power Supply	Dual, hot-swappable