1-20
Cisco ASA Series CLI Configuration Guide
Chapter 1 Configuring Objects
Feature History for Objects
Mixed IPv4 and IPv6 network object groups 9.0(1) Previously, network object groups could only contain all
IPv4 addresses or all IPv6 addresses. Now network object
groups can support a mix of both IPv4 and IPv6 addresses.
Note You cannot use a mixed object group for NAT.
We modified the following commands: object-group
network.
Security Group Object Groups for Cisco
TrustSec
8.4(2) Security group object groups for TrustSec were introduced.
We introduced the following commands: object-network
security, security.
Extended ACLand object enhancement to filter
ICMP traffic by ICMP code
9.0(1) ICMP traffic can now be permitted/denied based on ICMP
code.
We introduced or modified the following commands:
access-list extended, service-object, service.
Table 1-2 Feature History for Object Groups (continued)
Feature Name
Platform
Releases Feature Information
To Next Page
Loading...
