Name: Cisco ASR 1001-HX
Brand: Cisco
Rating: 4 (1 reviews)

To Next Page

To Previous Page

• Removing AC Power Supplies

• Removing DC Input Power Supplies

Step 2 Remove the chassis top cover by performing the following steps:

a) Remove the fourteen top surface screws on the chassis cover.

b) Remove the two screws from the left side of the chassis and the two screws from the right side of the

chassis.

c) Putting your thumbs in the thumb depression shown in the following figure, slide the cover slightly

backward and lift it off of the chassis.

Figure 19: Cisco ASR 1001-HX Router Top Cover Screw Locations

Thumb depression location1

Step 3 Position the chassis so that you have the most comfortable access to the chassis to remove the fans.

The fans are located at the rear of the chassis.

Step 4 Unplug the six fan connectors from the motherboard.

Removing and Replacing FRUs

Removing the Fans from a Cisco ASR 1001-HX Router

Other manuals for Cisco ASR 1001-HX

Questions and Answers:

Need help?

Do you have a question about the Cisco ASR 1001-HX and is the answer not in the manual?

General