Cisco ASR 1002 User Manual

Page 51 of 72
Requirement
Auditable
Events
Additional Audit
Record Contents
Sample Record
Mar 24 07:29:59.480: \%SEC_LOGIN-4-
LOGIN_FAILED: Login failed [user: admin15]
[Source: 10.21.0.101] [localport: 22] [Reason: Login
Authentication Failed] at 07:29:59 EDT Tue Mar 24
2015
FIA_X509_EXT
.1
Unsuccessful
attempt to
validate a
certificate
Session
establishment
with CA
Reason for failure
Entire packet
contents of packets
transmitted/receive
d during session
establishment.
42479: Initiator SPI : 6038B31E75BFF128 -
Responder SPI : ECB6C134F5652076 Message id: 1
42478: *Feb 5 11:10:18.749: IKEv2:(SA ID =
1):Sending Packet [To 210.1.1.1:500/From
110.1.1.1:500/VRF i0:f0]42442: *Feb 5
11:10:18.747: IKEv2:(SA ID = 1):[PKI -> IKEv2]
Getting of cert chain for the trustpoint PASSED
42441: *Feb 5 11:10:18.747: IKEv2:(SA ID =
1):[IKEv2 -> PKI] Getting cert chain for the
trustpoint rahul
42440: *Feb 5 11:10:18.747: IKEv2:(SA ID =
1):[PKI -> IKEv2] Retrieved trustpoint(s): 'rahul'
42439: *Feb 5 11:10:18.747: IKEv2:(SA ID =
1):[IKEv2 -> PKI] Retrieving trustpoint(s) from
received certificate hash(es)
42438: *Feb 5 11:10:18.747: IKEv2:(SA ID =
1):Processing IKE_SA_INIT message
42437: *Feb 5 11:10:18.747: IKEv2:(SA ID =
1):Verify SA init message
42436: *Feb 5 11:10:18.747: IKEv2:(SA ID =
1):Processing IKE_SA_INIT message
42435: SA KE N VID VID
NOTIFY(NAT_DETECTION_SOURCE_IP)
NOTIFY(NAT_DETECTION_DESTINATION_IP)
CERTREQ
NOTIFY(HTTP_CERT_LOOKUP_SUPPORTED)
Aug 3 19:10:18.621: %PKI-3-
CERTIFICATE_REVOKED: Certificate chain
validation has failed. The certificate (SN: 04) is
revoked

FMT_MOF.1(1)/
AdminAct
Modification of
the behaviour of
the TSF.
None.
Feb 17 2013 16:34:02: %PARSER-5-
CFGLOG_LOGGEDCMD: User:test_admin logged
command:logging informational

Cisco ASR 1002 Specifications

General

Ethernet LAN	Yes
Cabling technology	10/100/1000Base-T(X)
Networking standards	IEEE 802.3
Ethernet LAN data rates	10, 100, 1000 Mbit/s
Ethernet interface type	Gigabit Ethernet
DHCP client	-
Supported network protocols	BGP, GRE, OSPF, DVMRP, EIGRP, IS-IS, IGMPv3, PIM-SM, PIM-SSM
Ethernet LAN (RJ-45) ports	4
Security algorithms	SSH
VPN tunnels quantity	8000
Safety	UL60950-1 CSA, C22.2 No. 60950-1-03, EN 60950-1, IEC 60950-1, AS/NZS 60950.1
Certification	FCC 47CFR15 Class A AS/NZS CISPR 22 CISPR 22 Class A EN55022 Class A ICES-003 Class A VCCI Class A CNS-13438 Class A EN61000-3-2 EN61000-3-3
Internal memory	4096 MB
AC input voltage	85 - 264 V
Power source type	AC
AC input frequency	50 - 60 Hz
Power consumption (typical)	560 W
Operating altitude	0 - 3048 m
Storage temperature (T-T)	0 - 50 °C
Operating temperature (T-T)	0 - 40 °C
Storage relative humidity (H-H)	5 - 95 %
Operating relative humidity (H-H)	5 - 90 %
Product color	Gray
Rack capacity	2U

Weight and Dimensions

Depth	461 mm
Width	437.4 mm
Height	89 mm
Weight	- g