Cisco ASR 1002 User Manual

Page 64 of 72
Service or
Protocol
Description
Client
(initiating)
Allowed
Server
(terminating)
Allowed
Allowed use in the certified configuration
NTP
Network Time
Protocol
Yes
Yes
No
n/a
Any configuration. Use of key-based
authentication is recommended.
RADIUS
Remote
Authentication Dial In
User Service
Yes
Yes
No
n/a
If used for authentication of ASA
administrators, secure through IPsec.
SDI (RSA
SecureID)
RSA SecurID
authentication
Yes
Over IPsec
No
n/a
If used for authentication of ASA
administrators, secure through IPsec.
SNMP
Simple Network
Management Protocol
Yes (snmp-trap)
Yes
Yes
No
Outbound (traps) only. Recommended to
tunnel through IPsec.
SSH
Secure Shell
Yes
Yes
Yes
Yes
As described in the section 3.3.1 of this
document.
Telnet
A protocol used for
terminal emulation
Yes
Yes
Yes
Yes
Use of SSH is recommended.
TFTP
Trivial File Transfer
Protocol
Yes
Yes
No
n/a
Recommend using SCP instead, or tunneling
through IPsec.
CDP
Cisco Discovery
Protocol
n/a
n/a
n/a
n/a
Follow best practices for the secure usage as
there are no restrictions on use of these
protocols
DTP
Dynamic Trunking
Protocol
n/a
n/a
n/a
n/a
Follow best practices for the secure usage as
there are no restrictions on use of these
protocols
Frame Relay
Standardized wide
area network
technology that
specifies the physical
and logical link layers
of digital
telecommunications
channels using a
packet switching
methodology
n/a
n/a
n/a
n/a
Follow best practices for the secure usage as
there are no restrictions on use of these
protocols

Cisco ASR 1002 Specifications

General

Ethernet LAN	Yes
Cabling technology	10/100/1000Base-T(X)
Networking standards	IEEE 802.3
Ethernet LAN data rates	10, 100, 1000 Mbit/s
Ethernet interface type	Gigabit Ethernet
DHCP client	-
Supported network protocols	BGP, GRE, OSPF, DVMRP, EIGRP, IS-IS, IGMPv3, PIM-SM, PIM-SSM
Ethernet LAN (RJ-45) ports	4
Security algorithms	SSH
VPN tunnels quantity	8000
Safety	UL60950-1 CSA, C22.2 No. 60950-1-03, EN 60950-1, IEC 60950-1, AS/NZS 60950.1
Certification	FCC 47CFR15 Class A AS/NZS CISPR 22 CISPR 22 Class A EN55022 Class A ICES-003 Class A VCCI Class A CNS-13438 Class A EN61000-3-2 EN61000-3-3
Internal memory	4096 MB
AC input voltage	85 - 264 V
Power source type	AC
AC input frequency	50 - 60 Hz
Power consumption (typical)	560 W
Operating altitude	0 - 3048 m
Storage temperature (T-T)	0 - 50 °C
Operating temperature (T-T)	0 - 40 °C
Storage relative humidity (H-H)	5 - 95 %
Operating relative humidity (H-H)	5 - 90 %
Product color	Gray
Rack capacity	2U

Weight and Dimensions

Depth	461 mm
Width	437.4 mm
Height	89 mm
Weight	- g