Cisco ASR 1002 User Manual

Page 66 of 72
Service or
Protocol
Description
Client
(initiating)
Allowed
Server
(terminating)
Allowed
Allowed use in the certified configuration
EIGRP
Enhanced Interior
Gateway Routing
Protocol
n/a
n/a
n/a
n/a
Follow best practices for the secure usage as
there are no restrictions on use of these
protocols
RIP
Routing Information
Protocol
n/a
n/a
n/a
n/a
Follow best practices for the secure usage as
there are no restrictions on use of these
protocols
IS-IS
Intermediate system
to intermediate
system
n/a
n/a
n/a
n/a
Follow best practices for the secure usage as
there are no restrictions on use of these
protocols

Cisco ASR 1002 Specifications

General

Ethernet LAN	Yes
Cabling technology	10/100/1000Base-T(X)
Networking standards	IEEE 802.3
Ethernet LAN data rates	10, 100, 1000 Mbit/s
Ethernet interface type	Gigabit Ethernet
DHCP client	-
Supported network protocols	BGP, GRE, OSPF, DVMRP, EIGRP, IS-IS, IGMPv3, PIM-SM, PIM-SSM
Ethernet LAN (RJ-45) ports	4
Security algorithms	SSH
VPN tunnels quantity	8000
Safety	UL60950-1 CSA, C22.2 No. 60950-1-03, EN 60950-1, IEC 60950-1, AS/NZS 60950.1
Certification	FCC 47CFR15 Class A AS/NZS CISPR 22 CISPR 22 Class A EN55022 Class A ICES-003 Class A VCCI Class A CNS-13438 Class A EN61000-3-2 EN61000-3-3
Internal memory	4096 MB
AC input voltage	85 - 264 V
Power source type	AC
AC input frequency	50 - 60 Hz
Power consumption (typical)	560 W
Operating altitude	0 - 3048 m
Storage temperature (T-T)	0 - 50 °C
Operating temperature (T-T)	0 - 40 °C
Storage relative humidity (H-H)	5 - 95 %
Operating relative humidity (H-H)	5 - 90 %
Product color	Gray
Rack capacity	2U

Weight and Dimensions

Depth	461 mm
Width	437.4 mm
Height	89 mm
Weight	- g