To Next PageTo Next Page
Need help?Do you have a question about the Cisco ASR-920-10SZ-PD and is the answer not in the manual?
General| Model | ASR-920-10SZ-PD |
|---|---|
| Product Series | ASR 900 Series |
| Product Type | Router |
| Rack Height | 1 RU |
| Total Ports | 10 |
| Memory | 4 GB |
| Operating System | Cisco IOS XE |
| Humidity | 5% to 95% non-condensing |
| Fixed Uplink Ports | 2 x 10G SFP+ |
| Port Type | Gigabit Ethernet |
| Power Supply | AC |
| Input Voltage | AC 100-240V |
| Operating Temperature | 0 to 40°C |
| Storage Temperature | -40 to 158°F (-40 to 70°C) |
Details the essential preparations and checks required before installing the Cisco ASR-920-10SZ-PD Router.
Provides instructions for mounting the Cisco ASR-920-10SZ-PD Router into a standard rack.
Guides on establishing proper chassis ground connection and connecting power to the router.
Offers essential guidelines for connecting the router's power supplies to the site power source.
Details the process of assembling and connecting the DC power cable to the router unit.
Explains the procedure for installing and removing SFP modules in the router's slots.
Describes how to connect network cables to the router's 10/100/1000 Ethernet ports.
Covers the procedures for connecting the Cisco ASR-920-10SZ-PD Router to the network.
Outlines the steps for connecting a fiber-optic cable to an SFP module.
Details how to connect to the USB serial port using Microsoft Windows.
Describes connecting a Mac OS X system USB port to the console.
Describes connecting a Linux system USB port to the console.
Guides on installing the necessary USB device driver for Windows systems.
Provides steps for removing the Cisco USB device driver from Windows systems.
Explains how to connect a terminal to the EIA Console port on the router.
Instructions for removing and replacing a USB flash token memory stick from the router.
