Cisco ASR 920 series Installing Manual

Figure 19: Patch Panel Front iew with Brackets
Figure 20: Patch Panel Rear View with Brackets
Step 3 Secure the brackets to the patch panel with the screws removed when performing Step 3. The recommended
maximum torque is 28 in.-lb (3.16 N-m).
Step 4 Position the cable management guides against the mounting brackets on the patch panel, see the figure below.
Installing the Cisco ASR 920 Series Router
23
Installing the Cisco ASR 920 Series Router
Installing Patch Panel

Cisco ASR 920 series Specifications

General

Form Factor	1RU
Operating System	Cisco IOS XE
Model	ASR 920 series
Memory	4 GB DRAM
Power Supply	AC or DC
Storage Temperature	-40°C to 70°C (-40°F to 158°F)
Relative Humidity	5% to 95% non-condensing
MTBF	Varies by model
Management	CLI, SNMP