Cisco ASR 920 series Installing Manual

Figure 21: Patch Panel Front View with Brackets and Guides
Figure 22: Patch Panel Rear View with Brackets and Guides
Step 5 Secure the guides to the brackets with the screws. The recommended maximum torque is 28 in.-lb (3.16 N-m).
Step 6 Position the patch panel with brackets and guide onto the rack and secure with screws provided. The
recommended maximum torque is 28 in.-lb (3.16 N-m), see the figure below.
Installing the Cisco ASR 920 Series Router
24
Installing the Cisco ASR 920 Series Router
Installing Patch Panel

Cisco ASR 920 series Specifications

General

Form Factor	1RU
Operating System	Cisco IOS XE
Model	ASR 920 series
Memory	4 GB DRAM
Power Supply	AC or DC
Storage Temperature	-40°C to 70°C (-40°F to 158°F)
Relative Humidity	5% to 95% non-condensing
MTBF	Varies by model
Management	CLI, SNMP