Cisco ASR 920 series Installing Manual

Procedure
Step 1 Remove the mounting brackets from the accessory kit and position them beside the device.
You can install the brackets as shown in the figure.
Note
Figure 45: Wall Mount - Single
Installing the Cisco ASR 920 Series Router
47
Installing the Cisco ASR 920 Series Router
Wall Mount 3G Patch Panel

Cisco ASR 920 series Specifications

General

Form Factor	1RU
Operating System	Cisco IOS XE
Model	ASR 920 series
Memory	4 GB DRAM
Power Supply	AC or DC
Storage Temperature	-40°C to 70°C (-40°F to 158°F)
Relative Humidity	5% to 95% non-condensing
MTBF	Varies by model
Management	CLI, SNMP