Cisco ASR 920 series Installing Manual

USB Type-A to USB Type-A console cable2USB Type-A console port1
This procedure describes how to uninstall the Microsoft Windows USB device driver in Microsoft Windows
XP, Windows Vista, Windows 2000, Windows 7, and Windows 8.
Disconnect the router console terminal before uninstalling the driver.
Note
Procedure
Step 1 Choose Start > Control Panel > Add or Remove Programs .
Step 2 Scroll to Windows Driver Package - Exar corporation (xrusbser) Ports and click Remove. The Program
Maintenance window is displayed.
Step 3 Click Yes to uninstall the driver.
Connecting to the EIA Console Port
The US-to-RJ45 adapter cable and the DB9 console cable are not included with the router; they can be ordered
separately from Cisco.
Note
The serial console cable kit is not included with the router; it is ordered separately.
Note
To connect a terminal to the EIA Console port on the router, follow these steps:
Procedure
Step 1 Connect the USB end of the USB-to RJ-45 cable to the EIA Console port.
Step 2 Connect the RJ-45 end of the DB-9 adapter cable to the USB-to RJ-45 cable, as shown in the following figure.
Installing the Cisco ASR 920 Series Router
68
Installing the Cisco ASR 920 Series Router
Connecting to the EIA Console Port

Cisco ASR 920 series Specifications

General

Form Factor	1RU
Operating System	Cisco IOS XE
Model	ASR 920 series
Memory	4 GB DRAM
Power Supply	AC or DC
Storage Temperature	-40°C to 70°C (-40°F to 158°F)
Relative Humidity	5% to 95% non-condensing
MTBF	Varies by model
Management	CLI, SNMP