4-52
Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide
OL-16506-10
Chapter 4 Software Upgrade Process
ISSU Upgrade for Redundant Platforms
Examples
This example shows ISSU upgrade using subpackages on a Cisco ASR 1006 router or ASR 1013 router
with a dual RP setup:
Router# show version
Cisco IOS Software, IOS-XE Software (PPC_LINUX_IOSD-ADVENTERPRISEK9-M), Version
12.2(33)XNA, RELEASE SOFTWARE (fc1)
<output removed for brevity>
System image file is "bootflash:packages.conf"
<output removed for brevity>
Router# show platform
Chassis type: ASR1006
Slot Type State Insert time (ago)
--------- ------------------- --------------------- -----------------
0 ASR1000-SIP10 ok 00:03:03
0/0 SPA-4XT-SERIAL ok 00:01:35
0/1 SPA-5X1GE-V2 ok 00:01:35
0/2 SPA-2XOC3-POS ok 00:01:36
0/3 SPA-4XT-SERIAL ok 00:01:35
1 ASR1000-SIP10 ok 00:03:03
1/0 SPA-4X1FE-TX-V2 ok 00:01:36
1/1 SPA-2X1GE-V2 ok 00:01:35
1/3 SPA-1XOC12-POS ok 00:01:36
R0 ASR1000-RP1 ok, active 00:03:03
R1 ASR1000-RP1 ok, standby 00:03:03
F0 ASR1000-ESP10 ok, active 00:03:03
F1 ASR1000-ESP10 ok, standby 00:03:03
P0 ASR1006-PWR-AC ok 00:02:07
P1 ASR1006-FAN ok 00:02:07
Slot CPLD Version Firmware Version
--------- ------------------- ---------------------------------------
0 07091401 12.2(33r)XNB
1 07091401 12.2(33r)XNB
R0 07062111 12.2(33r)XNB
R1 07062111 12.2(33r)XNB
F0 07091401 12.2(33r)XNB
F1 07091401 12.2(33r)XNB
Router# show version r0 installed
Package: Provisioning File, version: n/a, status: active
File: bootflash:packages.conf, on: RP0
Built: n/a, by: n/a
File SHA1 checksum: 174bef13f7ce20af077bae7aaefb5279c790dd57
Step 15
redundancy force-switchover
Example:
Router# redundancy force-switchover
Forces an RP switchover to complete the upgrade.
Step 16
request platform software package clean
(Optional) Removes all unused subpackage files from the
router.
Command or Action Purpose
To Next Page
Loading...
Need help?
General
