Name: Cisco C1121-4P
Brand: Cisco
Rating: 4 (1 reviews)

To Next Page

To Previous Page

CHAPTER 2

Prepare for Router Installation

Before you install the Cisco 1000 Series Integrated Services Routers, you must prepare your site for the

installation. This chapter provides pre-installation information, such as recommendations and requirements

that should be considered before installing your router.

See the following sections to prepare for installation:

• Safety Recommendations, on page 23

• General Site Requirements, on page 24

• Rack Requirements, on page 25

• Safety Recommendations, on page 26

• Power Guidelines and Requirements, on page 26

• Network Cabling Specifications, on page 27

• Required Tools and Equipment for Installation and Maintenance, on page 29

Safety Recommendations

IMPORTANT SAFETY INSTRUCTIONS

This warning symbol means danger. You are in a situation that could cause bodily injury. Before you work

on any equipment, be aware of the hazards involved with electrical circuitry and be familiar with standard

practices for preventing accidents. Use the statement number provided at the end of each warning to locate

its translation in the translated safety warnings that accompanied this device. Statement 1071

SAVE THESE INSTRUCTIONS

Warning

Ultimate disposal of this product should be handled according to all national laws and regulations. Statement

1040.

Warning

Hardware Installation Guide for the Cisco 1000 Series Integrated Services Router

Questions and Answers:

Need help?

Do you have a question about the Cisco C1121-4P and is the answer not in the manual?

Cisco C1121-4P Specifications

General

LAN Ports	4
Integrated Wireless	No
Form Factor	Desktop
Product Type	Router
Connectivity Technology	Wired
Data Link Protocol	Ethernet, Fast Ethernet, Gigabit Ethernet
Ports Qty	4
Power Over Ethernet (PoE)	Yes
Routing Protocol	OSPF, BGP, EIGRP
Remote Management Protocol	SNMP
Encryption Algorithm	AES, 3DES, DES
Features	Firewall, VPN support
Compliant Standards	IEEE 802.3, IEEE 802.3u
Type	Router
PoE Standards	IEEE 802.3af
Power Supply	External AC adapter
Operating Temperature	32°F to 104°F (0°C to 40°C)
Storage Temperature	-4°F to 149°F (-20°C to 65°C)
Humidity	10 - 95% (non-condensing)
Network/Transport Protocol	DHCP