Name: Cisco C1121-4P
Brand: Cisco
Rating: 4 (1 reviews)

To Next Page

To Previous Page

Remove the Cover

To remove the cover, do these

steps:

Remove the 14 screws from either side of the cover.1 and 2

Step 1 Read the Safety Warnings and disconnect the power supply before you perform any module replacement.

Step 2 Confirm the router is turned off and disconnected from the power supply.

Hardware Installation Guide for the Cisco 1000 Series Integrated Services Router

Install and Upgrade Internal Modules and Field Replaceable Units

Remove the Cover

Questions and Answers:

Need help?

Do you have a question about the Cisco C1121-4P and is the answer not in the manual?

Cisco C1121-4P Specifications

General

LAN Ports	4
Integrated Wireless	No
Form Factor	Desktop
Product Type	Router
Connectivity Technology	Wired
Data Link Protocol	Ethernet, Fast Ethernet, Gigabit Ethernet
Ports Qty	4
Power Over Ethernet (PoE)	Yes
Routing Protocol	OSPF, BGP, EIGRP
Remote Management Protocol	SNMP
Encryption Algorithm	AES, 3DES, DES
Features	Firewall, VPN support
Compliant Standards	IEEE 802.3, IEEE 802.3u
Type	Router
PoE Standards	IEEE 802.3af
Power Supply	External AC adapter
Operating Temperature	32°F to 104°F (0°C to 40°C)
Storage Temperature	-4°F to 149°F (-20°C to 65°C)
Humidity	10 - 95% (non-condensing)
Network/Transport Protocol	DHCP