Cisco Catalyst 2960-X Hardware Installation Guide

Power Supply Modules (Applies to the Catalyst 2960-XR Switches) 19
Management Options 20
Network Configurations 21
CHAPTER 2 Switch Installation 23
Safety Warnings 23
Box Contents 26
Tools and Equipment 26
Installation Guidelines 26
Verifying Switch Operation 27
Planning and Installing a Switch Stack (Optional) 28
Stack Guidelines 28
Installing the FlexStack-Plus Module 29
Stack Cabling 31
Stack Bandwidth and Partitioning Examples 32
Power-On Sequence for Switch Stacks 33
Installing the Switch 33
Rack-Mounting 33
Attaching the Rack-Mount Brackets for the Catalyst 2960-X Switches 35
Attaching the Rack-Mount Brackets for the Catalyst 2960-XR Switches 36
Mounting in a Rack 37
Wall-Mounting 38
Attaching the Brackets for Wall-Mounting 38
Attaching the RPS Connector Cover 39
Mounting on a Wall 40
Installing the Switch on a Table or Shelf 41
After Switch Installation 41
Connecting the FlexStack Cables (Optional) 41
Removing a FlexStack Cable 42
Installing the Power Cord Retainer (Optional) 43
Installing SFP and SFP+ Modules 45
Installing an SFP or SFP+ Module 46
Removing an SFP or SFP+ Module 47
Connecting to SFP and SFP+ Modules 47
Connecting to Fiber-Optic SFP and SFP+ Modules 48
Catalyst 2960-X and 2960-XR Switch Hardware Installation Guide
iv OL-28309-02
Contents

Cisco Catalyst 2960-X Specifications

General

Console port	RJ-45
USB 2.0 ports quantity	2
SFP module slots quantity	4
Installed SFP modules quantity	-
Gigabit Ethernet (copper) ports quantity	48
Basic switching RJ-45 Ethernet ports type	Gigabit Ethernet (10/100/1000)
Power source	AC
Input current	5 A
AC input voltage	100 - 240 V
Power consumption (typical)	60.9 W
Number of power supply units	1
Redundant power supply (RPS) support	Yes
Operating altitude	0 - 3000 m
Non-operating altitude	0 - 4000 m
Storage temperature (T-T)	-25 - 70 °C
Operating temperature (T-T)	-5 - 40 °C
Operating relative humidity (H-H)	10 - 95 %
Switching protocols	UDP, TCP, RADIUS/TACACS+
Number of VLANs	1023
Networking standards	IEEE 802.1ab, IEEE 802.1D, IEEE 802.1p, IEEE 802.1Q, IEEE 802.1s, IEEE 802.1w, IEEE 802.1x, IEEE 802.3, IEEE 802.3ab, IEEE 802.3ad, IEEE 802.3ae, IEEE 802.3af, IEEE 802.3ah, IEEE 802.3at, IEEE 802.3az, IEEE 802.3u, IEEE 802.3x, IEEE 802.3z
Throughput	107.1 Mpps
Jumbo frames	9216
Number of queues	8
MAC address table	16000 entries
Number of static routes	1000
DHCP features	DHCP server
Authentication	MAC-based authentication, Port-based authentication
Security algorithms	802.1x RADIUS, SNMP, SSH
Access Control List (ACL) rules	3
Switch type	Managed
Switch layer	L2/L3
Safety	UL 60950-1, CAN/CSA-C22.2 No. 60950-1, EN 60950-1, IEC 60950-1, AS/NZS 60950-1
Form factor	1U
Product color	Black
Total Power over Ethernet (PoE) budget	370 W
Power over Ethernet (PoE) ports quantity	24
Power over Ethernet plus (PoE+) ports quantity	12
Memory type	DRAM
Noise level	39 dB
Flash memory	128 MB
Internal memory	512 MB
Processor frequency	600 MHz
Mean time between failures (MTBF)	276870 h

Weight and Dimensions

Depth	368 mm
Width	445 mm
Height	45 mm
Weight	5800 g