Cisco Catalyst 2960-X Hardware Installation Guide

• PWR-C2-250WAC: 4–2 A
• PWR-C2-640WAC: 8–4 A
• PWR-C2-1025WAC: 12–6 A
Input current
15
•
PWR-C2-250WAC: +12 V @ 20.83 A
• PWR-C2-640WAC: +12 V @ 20.83 A, –54 V@7.36 A
• PWR-C2-1025WAC: +12 V @ 20.83 A, –54 V@14.6 A
Output ratings
•
PWR-C2-250WAC: 945 BTUs per hour, 277 W
•
PWR-C2-640WAC: 2371 BTUs per hour, 695 W
•
PWR-C2-1025WAC: 3801 BTUs per hour, 1114 W
Total input BTU
16
•
PWR-C2-250WAC: 853 BTUs per hour, 250 W
•
PWR-C2-640WAC: 2183 BTUs per hour, 640 W
•
PWR-C2-1025WAC: 3497 BTUs per hour, 1025 W
Total output BTU
1
15
The information is based on the rating of the power supply (max.) and does not reflect the actual measured consumption numbers. For the actual power
consumption based on measurement, see the data sheet at: http://www.cisco.com/en/US/prod/collateral/switches/ps5718/ps12995/data_
sheet_c78-728232.html
16
The total input and total output BTU ratings refer to input power to the power supply and output power to the switch. The BTU ratings are based on 100 VAC
for the 250-W and 640-W power supplies and 115 VAC for the 1025-W power supply .
Catalyst 2960-X and 2960-XR Switch Hardware Installation Guide
OL-28309-02 75
Technical Specifications
Specifications for the Catalyst 2960-XR Switches

Cisco Catalyst 2960-X Specifications

General

Console port	RJ-45
USB 2.0 ports quantity	2
SFP module slots quantity	4
Installed SFP modules quantity	-
Gigabit Ethernet (copper) ports quantity	48
Basic switching RJ-45 Ethernet ports type	Gigabit Ethernet (10/100/1000)
Power source	AC
Input current	5 A
AC input voltage	100 - 240 V
Power consumption (typical)	60.9 W
Number of power supply units	1
Redundant power supply (RPS) support	Yes
Operating altitude	0 - 3000 m
Non-operating altitude	0 - 4000 m
Storage temperature (T-T)	-25 - 70 °C
Operating temperature (T-T)	-5 - 40 °C
Operating relative humidity (H-H)	10 - 95 %
Switching protocols	UDP, TCP, RADIUS/TACACS+
Number of VLANs	1023
Networking standards	IEEE 802.1ab, IEEE 802.1D, IEEE 802.1p, IEEE 802.1Q, IEEE 802.1s, IEEE 802.1w, IEEE 802.1x, IEEE 802.3, IEEE 802.3ab, IEEE 802.3ad, IEEE 802.3ae, IEEE 802.3af, IEEE 802.3ah, IEEE 802.3at, IEEE 802.3az, IEEE 802.3u, IEEE 802.3x, IEEE 802.3z
Throughput	107.1 Mpps
Jumbo frames	9216
Number of queues	8
MAC address table	16000 entries
Number of static routes	1000
DHCP features	DHCP server
Authentication	MAC-based authentication, Port-based authentication
Security algorithms	802.1x RADIUS, SNMP, SSH
Access Control List (ACL) rules	3
Switch type	Managed
Switch layer	L2/L3
Safety	UL 60950-1, CAN/CSA-C22.2 No. 60950-1, EN 60950-1, IEC 60950-1, AS/NZS 60950-1
Form factor	1U
Product color	Black
Total Power over Ethernet (PoE) budget	370 W
Power over Ethernet (PoE) ports quantity	24
Power over Ethernet plus (PoE+) ports quantity	12
Memory type	DRAM
Noise level	39 dB
Flash memory	128 MB
Internal memory	512 MB
Processor frequency	600 MHz
Mean time between failures (MTBF)	276870 h

Weight and Dimensions

Depth	368 mm
Width	445 mm
Height	45 mm
Weight	5800 g