Cisco Catalyst 3750-X Message Guide

2-13
Catalyst 3750-X, 3750-E, 3560-X, and 3560-E Switch System Message Guide
OL-9772-05
Chapter 2 Message and Recovery Procedures
CLS_ACC Messages
CLS_ACC Messages
Error Message CLS_ACC-2-CONFIG_NV_DATA: Express setup parameter committed. Default
port role will be applied
Explanation After the Express Setup settings are configured, the switch becomes a configured
switch. The default port roles are automatically applied to all ports. You can now manually modify
the port role configurations.
Recommended Action No action is required.
Error Message CLS_ACC-2-MODE_ENTERED: Entering consoleless access mode [chars]
Explanation The switch enters consoleless access mode. [chars] is the name of the mode.
Recommended Action No action is required.
Error Message CLS_ACC-2-MODE_EXITED: Complete consoleless access from mode [chars]
Explanation The switch exits from consoleless access mode. [chars] is the mode.
Recommended Action No action is required.
Error Message CLS_ACC-2-NO_PROCESS: Process creation failure
Explanation The system did not create the process to execute consoleless access.
Recommended Action Copy the message exactly as it appears on the console or in the system log.
Research and attempt to resolve the error by using the Output Interpreter. Use the Bug Toolkit to
look for similar reported problems. If you still require assistance, open a case with the TAC, or
contact your Cisco technical support representative, and provide the representative with the gathered
information. For more information about these online tools and about contacting Cisco, see the
“Error
Message Traceback Reports” section on page 1-7.
Error Message CLS_ACC-2-SETUP_BTN_PRS: [chars]
Explanation Pressing the Mode button for more than 5 seconds causes an unconfigured switch to go
into Express Setup mode. Pressing the Mode button for more than 5 seconds does not affect an
already configured switch. The switch does not go into Express Setup mode. [chars] is the mode.
Recommended Action No action is required.

Cisco Catalyst 3750-X Specifications

General

Switching Capacity	160 Gbps
Stacking Bandwidth	64 Gbps
Max Stacking Units	9
Layer Support	Layer 2 and Layer 3
Form Factor	Rack-mountable
DRAM	256 MB
Flash Memory	64 MB
Model	Cisco Catalyst 3750-X Series
Ports	24 or 48 10/100/1000 Ethernet ports
Uplink Interfaces	4 SFP or 2 SFP+
Features	StackWise Plus, EnergyWise
Image	IP Base or IP Services
Operating Temperature	0 to 40°C
Operating Humidity	10 to 85% noncondensing