2-51
Catalyst 3750-X, 3750-E, 3560-X, and 3560-E Switch System Message Guide
OL-9772-05
Chapter 2 Message and Recovery Procedures
IP_DEVICE_TRACKING Messages
IP_DEVICE_TRACKING Messages
Error Message IP_DEVICE_TRACKING-4-TABLE_LOCK_FAILED: Table already locked by
process-id [dec]([chars])
Note This message applies only to the Catalyst 3750-X and 3750-E switches.
Explanation The IP device tracking table could not be updated due to a lock held by another process.
[dec] is the process number, and [chars] is the process.
Recommended Action No action is required.
MAC_MOVE Messages
Error Message MAC_MOVE-4-NOTIF: Host [enet] in vlan [dec] is flapping between port
[chars] and port [chars].
Explanation The host is moving between the specified ports. [enet] is the Ethernet address of the
host, [dec] is the VLAN ID, the first [chars] is the first port, and the second [chars] is the second port.
Recommended Action Check your network for loops.
PAGP Messages
Error Message PAGP_DUAL_ACTIVE-3-OBJECT_CREATE_FAILED: Unable to create [chars]
Explanation The switch cannot create the specified managed object. [chars] is the object name.
Recommended Action No action is required.
Error Message PAGP_DUAL_ACTIVE-3-RECOVERY_TRIGGER: PAgP running on [chars] informing
virtual switches of dual-active: new active id [enet], old id [enet]
Explanation PAgP received a new active ID on the specified interface and all virtual switches moved
into a dual-active scenario. As a result, the interface informed the virtual switches of this, which
caused one switch to go into recovery mode. [chars] is the interface, the first [enet] is the new active
ID, and the second [enet] is the ID that it replaces.
Recommended Action No action is required.
To Next Page
Loading...
Need help?
General
