Cisco Catalyst 3750-X Message Guide

2-73
Catalyst 3750-X, 3750-E, 3560-X, and 3560-E Switch System Message Guide
OL-9772-05
Chapter 2 Message and Recovery Procedures
PLATFORM_STACKPOWER Messages
Error Message PLATFORM_STACKPOWER-4-UNBALANCED_PS: Switch [dec] [dec] power stack
has unbalanced power supplies
Explanation The switch stack has a switch with multiple power supplies, but another switch in the
same switch stack has no power supplies. The first [dec] is the switch with multiple power supplies.
The second [dec] is the switch without power supplies.
Recommended Action Copy the message exactly as it appears on the console or in the system log.
Research and attempt to resolve the error by using the Output Interpreter. Use the Bug Toolkit to
look for similar reported problems. If you still require assistance, open a case with the TAC, or
contact your Cisco technical support representative, and provide the representative with the gathered
information. For more information about these online tools and about contacting Cisco, see the
“Error
Message Traceback Reports” section on page 1-7.
Error Message PLATFORM_STACKPOWER-4-INSUFFICIENT_PWR: Switch [dec]...[dec] power
stack does not have enough power
Explanation The switch stack does not have enough power to start all the switches in the stack.
[dec] .... [dec] are the switches that could not be started.
Recommended Action Copy the message exactly as it appears on the console or in the system log.
Research and attempt to resolve the error by using the Output Interpreter. Use the Bug Toolkit to
look for similar reported problems. If you still require assistance, open a case with the TAC, or
contact your Cisco technical support representative, and provide the representative with the gathered
information. For more information about these online tools and about contacting Cisco, see the
“Error
Message Traceback Reports” section on page 1-7.
Error Message PLATFORM_STACKPOWER-4-PRIO_CONFLICT: Switch [dec] [dec] power stack
has conflicting power priorities
Explanation The power priorities of one stack switch conflict with the power priorities of another
stack switch. The first [dec] and the second [dec] are the switches that have conflicting power
priorities.
Recommended Action Copy the message exactly as it appears on the console or in the system log.
Research and attempt to resolve the error by using the Output Interpreter. Use the Bug Toolkit to
look for similar reported problems. If you still require assistance, open a case with the TAC, or
contact your Cisco technical support representative, and provide the representative with the gathered
information. For more information about these online tools and about contacting Cisco, see the
“Error
Message Traceback Reports” section on page 1-7.
Error Message PLATFORM_STACKPOWER-4-UNDER_VOLTAGE: Switch [dec] experienced an under
voltage condition
Explanation The switch had a low-voltage condition during the last time that it started or shut down.
[dec] is the stack member number.
Recommended Action Copy the message exactly as it appears on the console or in the system log.
Research and attempt to resolve the error by using the Output Interpreter. Use the Bug Toolkit to
look for similar reported problems. If you still require assistance, open a case with the TAC, or

Cisco Catalyst 3750-X Specifications

General

Switching Capacity	160 Gbps
Stacking Bandwidth	64 Gbps
Max Stacking Units	9
Layer Support	Layer 2 and Layer 3
Form Factor	Rack-mountable
DRAM	256 MB
Flash Memory	64 MB
Model	Cisco Catalyst 3750-X Series
Ports	24 or 48 10/100/1000 Ethernet ports
Uplink Interfaces	4 SFP or 2 SFP+
Features	StackWise Plus, EnergyWise
Image	IP Base or IP Services
Operating Temperature	0 to 40°C
Operating Humidity	10 to 85% noncondensing