Cisco Catalyst 3850 Guide

Uplink Interface Connectivity
Identify Configuration Values
42
Best Practice User Guide for the Catalyst 3850 and Catalyst 3650 Switch Series
Note Replace the blue italicized example values with your own values.
Note Configuration examples begin in global configuration mode, unless noted otherwise.
Table 5 Uplink Connectivity Values
A. Value Name B. Example Value Name C. Your Value
Uplink interfaces
GigabitEthernet 1/1/1
GigabitEthernet 1/1/2
GigabitEthernet 2/1/1
GigabitEthernet 2/1/2
Data VLAN
10
Voice VLAN
11
Access points VLAN
12
Wireless clients VLAN
200
Management VLAN ID
100
Dummy VLAN
999
IPv6 Router Advertisement
Guard policy name
switch_ipv6_raguard
router_ipv6_raguard
IPv6 Router Advertisement
Guard policy name
uplink_ipv6__quard
QoS service policy input name
AutoQos-4.0-Trust-Dscp-Input
-Policy
QoS service policy output name
AutoQos-4.0-Output-Policy

Cisco Catalyst 3850 Specifications

General

Stacking Bandwidth	480 Gbps
Max Stacking Units	9
Form Factor	Rack-mountable
RAM	4 GB
Flash Memory	4 GB
Operating System	Cisco IOS XE
Model	Catalyst 3850
Ports	24 or 48 Gigabit Ethernet ports
Uplink Interfaces	4 x 1GE, 2 x 10GE, or 4 x 10GE
Power Supply	Redundant power supplies
Dimensions	44.5 x 44.8 x 4.45 cm
Weight	7.6 kg
Features	IPv6
Power over Ethernet (PoE)	PoE, PoE+, UPOE (varies by model)
Operating Temperature	0 to 40°C