DateTimeVerified
By
ActivityTask No.
EMI evaluation
•
Distance limitations for signaling
•
Site wiring
•
RFI levels
6
5
Verify that each power supply installed in the chassis has a dedicated AC source circuit.
6
Refer to the power supply'VA rating as a sizing criteria in determining the output required by the UPS. The power supply kVA rating value is listed in the
specifications table for each power supply in Appendix A (power supply specifications).
Cisco Catalyst 6807-XL Switch Hardware Installation Guide
OL-30656-01 27
Preparing for Installation
Site Preparation Checklist