Cisco Catalyst 6807-XL - Appendix D Repacking the Switch

APPENDIX D
Repacking the Switch
To return or move the switch chassis, follow these steps and repack the switch using the original packaging
material:
Procedure
Step 1
Place the chassis in the packing bag (not shown here).
Step 2
Place foam caps over the chassis.
Step 3
Slide the components arranged in step 2 into the carton.
Step 4
Place the accessory kit and cables in the compartments provided in the padding material (Callout 5).
You must include the accessory kit for the final package to fit properly.Note
Step 5
Place the padding material (shown in callout 5) over the top of the chassis.
Step 6
Place the carton over the pallet.
Step 7
Fold the carton flaps down over the top and seal with packing tape.
Cisco Catalyst 6807-XL Switch Hardware Installation Guide
OL-30656-01 99