Cisco Catalyst 6807-XL - Page 93

More InformationSupported on These
Modules
DescriptionWDM
Transceiver
Type
Cisco Dense
Wavelength-Division
Multiplexing Small Form-Factor
Pluggable Module
•
WS-X6724-SFP
•
WS-X6748-SFP
•
WS-X6848-SFP
•
VS-S2T-10G
•
VS-S2T-10G XL
The Cisco DWDM SFP is a
hot-swappable I/O transceiver
module that you can plug into
Gigabit Ethernet SFP ports or
slots. It supports the ITU
100-GHz wavelength grid and
matches the wavelength plan for
the Cisco 100-GHz ONS product
family. It is a fixed-wavelength
SFP, with 40 different SFP
models. It uses standard SFP
interface network: dual LC/PC
connector.
Only connections with
patch cords having PC
or UPC connectors are
supported. Patch cords
having APC connectors
are not supported.
Note
DWDM
SFP
•
Cisco 10GBASE Dense
Wavelength-Division
Multiplexing SFP+
Modules Data Sheet
•
Cisco OneX Converter
Module
•
Cisco 40GBASE CFP
Modules Data Sheet
You an use these 10-GB
modules with the Cisco
OneX Converter Module
13
•
WS-X6816-10G
•
WS-X6816-10G XL
•
WS-X6908-10
•
WS-X6908-10 XL
•
VS-S2T-10G
•
VS-S2T-10G XL
You can also use these
40-GB modules with the
Cisco FourX Converter
Module
14
:
•
WS-X6904-40G-2T
•
WS-X6904-40G-2TXL
The Cisco DWDM SFP+
transceiver module is a
hot-swappable I/O device that
you can plug into an Ethernet
SFP+ port of a Cisco switch or
router to link the port with the
network. It supports 40
nontunable ITU 100-GHz
wavelengths. It also supports
digital optical monitoring
capability and the Cisco quality
identification (ID) feature, which
enables a Cisco switch or router
to identify whether or not the
module is an SFP+ module
certified and tested by Cisco.
DWDM
SFP+
Cisco Catalyst 6807-XL Switch Hardware Installation Guide
OL-30656-01 83
Transceivers, Module Connectors, and Cable Specifications
WDM Transceivers