CHAPTER 2
Product Overview
This section contains the following:
• Overview, on page 11
• General Description, on page 11
• Cisco IR1800 Series Platform Features, on page 12
• Front Panel Overview, on page 15
• Rear Panel Overview, on page 16
• Pluggable Interface Module (PIM), on page 17
• SSD Module, on page 17
• GNSS Module, on page 17
• Wi-Fi Module, on page 17
• Gigabit Ethernet Combo Port, on page 17
• SFP Modules, on page 17
• Gigabit Ethernet Copper Ports, on page 18
• Power over Ethernet (PoE), on page 18
• Front Panel LEDs, on page 19
• Reset Button, on page 20
• Supported Cisco Antennas and Antenna Accessories, on page 20
• Modem Support, on page 21
• Power Supply, on page 22
• Serial Ports, on page 22
• USB Ports, on page 23
Overview
This chapter provides an overview of the features available for the Cisco Catalyst IR1800 Rugged Series
Router. For the purposes of this guide, it will be referred to as the IR1800 Series.
General Description
The Cisco Catalyst IR1800 Rugged Series Router is a next generation modular industrial router based on IOS
XE, with advanced features such modular Wi-Fi, modular Cellular/WAN, CAN Bus, SSD, Digital I/O, GPS
or GNSS Dead Reckoning.
Cisco Catalyst IR1800 Rugged Series Router Hardware Installation Guide
11