CHAPTER 3
Installing the Router
This section contains the following:
• Overview, on page 25
• Safety Information, on page 25
• Equipment, Tools, and Connections, on page 26
• Installing the Router, on page 27
• Mounting on a Wall, Table, or Other Flat Surface, on page 27
• Installing a DIN Rail, on page 29
• Installing the Router Ground Connection, on page 37
Overview
This section describes the equipment and the procedures for successfully installing the Cisco IR1800 ISR.
Safety Information
Do not install the router or power supplies next to a heat source of any kind, including heating vents.
Caution
Read the installation instructions before connecting the system to the power source. Statement 1004
Danger
Only trained and qualified personnel should be allowed to install, replace, or service this equipment. Statement
1030
Danger
Ultimate disposal of this product should be handled according to all national laws and regulations. Statement
1040
Danger
Cisco Catalyst IR1800 Rugged Series Router Hardware Installation Guide
25