EasyManua.ls Logo

Cisco Catalyst IR1800 Rugged Series - Digital I;O Specifications

Cisco Catalyst IR1800 Rugged Series
92 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
This product is suitable for use in environmental air space in accordance with section 300.22.C of the National
Electrical Code and sections 2-128, 12-010(3), and 12-100 of the Canadian Electrical Code, Part 1, C22.1.
You should not install the power supply or power injector in air handling spaces
Note
The maximum ambient operating temperature range is –40 to 140°F (–40 to 60°C).
Note
Hazardous Locations Standards and Marking Strings
The following standards were used for the hazardous locations approvals and certifications:
CSA C22.2 No. 60079-0:19, 4th Ed., Issued 2019-0
CAN/CSA-C22.2 No. 60079-7:16, 2nd Ed., Issued 2016-10
CSA C22.2 No. 213-17, 3rd Ed., Rev. 2019-08-26
EN IEC 60079-0:2018 EN IEC 60079-7: 2015 +A1:2018
EN IEC 60079-7: 2015 +A1:2018
UL 121201, 9th Ed., Rev. 2019-08-26
UL 60079-0 ,7th Ed., Rev. 2020-04-15
UL 60079-7 5th Ed. Rev. 2017-04-21
The following hazardous locations strings are provided on the router:
Class 1, Div 2, Groups A B C D
Class I, Zone 2, AEx ec IIC T4 Gc
UL 21 ATEX 2512X
Ex ec IIC T4 Gc
EMC Information
For EMC and safety information, see the Regulatory Compliance and Safety Information.
Class A Notice for FCC
Modifying the equipment without Cisco’s authorization may result in the equipment no longer complying
with FCC requirements for Class A digital devices. In that event, your right to use the equipment may be
limited by FCC regulations, and you may be required to correct any interference to radio or television
communications at your own expense.
Cisco Catalyst IR1800 Rugged Series Router Hardware Installation Guide
79
Regulatory Compliance
Hazardous Locations Standards and Marking Strings

Table of Contents

Other manuals for Cisco Catalyst IR1800 Rugged Series

Related product manuals