Cisco Catalyst IR1800 Rugged Series - Gigabit Ethernet Copper Ports; Power over Ethernet (Poe)

Table 3: Supported Gigabit SFPs
DOMIndustrial
-40C to
+85C
Extended
-5C to
+85C
Commercial
0C to +70C
FiberDistanceGE SFP
YESMMF220-550 mGLC-SX-MM-RGD
YESMMF/SMF550m/10 kmGLC-LX-SM-RGD
YESYESSMF70 kmGLC-ZX-SM-RGD
YESYESMMF220-550 mSFP-GE-S
YESYESMMF/SMF550 m/10
km
SFP-GE-L
YESYESSMF70 kmSFP-GE-Z
Table 4: Supported FE SFPs
DOMIndustrial
-40C ~
+85C
Extended
-5C ~
+85C
Commercial
0C ~ +70C
FiberDistanceFE SFP
YESMMF2 kmGLC-FE-100FX-RGD
YESSMF10 kmGLC-FE-100LX-RGD
For the most up-to-date list of supported SFP models for Cisco Industrial Ethernet switches, see the
following:https://tmgmatrix.cisco.com/
Gigabit Ethernet Copper Ports
The IR1800 has 4 RJ-45 copper ports. These copper ports support standard 3-speed, 10/100/1000Base-T
Ethernet features including auto-MDIX, forced or auto-negotiation of speed and duplex, Fast Link Drop, and
cable diagnostics.
Power over Ethernet (PoE)
There is a 30.8W capacity PoE PSE power supply built into the device, that can power any of its LAN switch
ports compliant to PoE/PoE+ 802.3af/at PD specification, subject to 30.8W maximum power shared among
all ports.
Cisco Catalyst IR1800 Rugged Series Router Hardware Installation Guide
18
Product Overview
Gigabit Ethernet Copper Ports