DescriptionCisco PID
Pole/wall mounting bracket with tilt and rotationIW-ACC-PMK1=
Standard pole/wall mount braketAIR-ACC1530-PMK1=
• Accessory kits
DescriptionCisco PID
Adapter, M12 X-code to RJ45 Ethernet connectorIW-ACC-M12ETH=
Adapter, M12 4 Pin A-Code to Micro-fit power connectorIW-ACC-M12PWR=
• M12 Cables
DescriptionCisco PID
M12 DC power cable, 4 pins, A-Code, 10 ftCAB-PWR-M12-10=
M12 to RJ-45 Ethernet cable, 8 pins, X-Code, 10 ftCAB-RJ45-M12-10=
• RF Coaxial Adapters
DescriptionCisco PID
N(f) to N(f) RF adapter DC-11 GHzAIR-ACC370-NF-NF=
• RF Coaxial Cables
DescriptionCisco PID
5 ft. LMR-400-DB, N(m)-STR to N(m)-R/ACAB-L400-5-N-N=
5 ft. LMR-400-DB, N(m)-STR to N(m)-STRCAB-L400-5-N-NS=
10 ft. LMR-400-DB, N(m)-STR to N(m)-STRAIR-CAB010LL-N=
20 ft. LMR-400-DB, N(m)-STR to N(m)-RACAB-L400-20-N-N=
25 ft. LMR-400-DB/FR/CMR, N(m)-STR to N(m)-RAAIR-CAB025HZ-N=
30 ft. LMR-600-DB, N(m)-STR to N(m)-RACAB-L600-30-N-N=
• Lightning Arrestors
DescriptionLightning Arrestor
Lightning Arrestor kit, N(m) to N(f)CGR-LA-NM-NF=
Lightning Arrestor kit, TNC(f) for GNSSACC-LA-G-TM-TF=
• Power adapter and power injectors when PoE is not available
Cisco Catalyst IW9165D Heavy Duty Access Point Hardware Installation Guide
14
Unpacking Your Access Point
Cisco Orderable Accessories
To Next Page
Loading...
