Cisco CRS

DescriptionCommand
Identifies a specific destination MAC address explicitly as a match
criterion in a class map.
match destination-address, on page 39
Identifies specific discard class values as a match criteria for a class
map.
match discard-class, on page 41
Identifies specific IP differentiated services code point (DSCP)
values as match criteria for a class map.
match dscp, on page 44
Identifies specific three-bit experimental (EXP) field values in the
topmost Multiprotocol Label Switching (MPLS) label as match
criteria for a class map.
match mpls experimental topmost, on
page 48
Identifies IP precedence values as match criteria.match precedence, on page 50
Identifies a specific protocol as the match criterion for a class map.match protocol, on page 53
Identifies specific quality-of-service (QoS) group values as match
criteria in a class map.
match qos-group, on page 56
Identifies a specific source MAC address as match criterion in a
class map.
match source-address, on page 58
Identifies selected VLAN IDs as the match criteria for a class map.match vlan, on page 60
Cisco IOS XR Modular Quality of Service Command Reference for the Cisco CRS Router, Release 4.0
14 OL-23235-03
Quality of Service Commands on the Cisco IOS XR Software
class-map