Appendix 1: Troubleshooting 19
Locating LEDs and Components 19
Definitions of LED States 19
Reset from the Internal Recovery Partition (IRP) 19
Task 1: Reset the SD Card and Enable the Virtual Drive 19
Task 2: IRP Reinstall Using the KVM Console 19
Task 3: Disable the Virtual Drive After the Reinstall 20
Lag During Boot up Due to Power Characterization Check 20
Notices 21
Technical Support 21
Accessibility Notice 21
Cisco Legal Information 22
Cisco Trademark 23
4
Cisco Expressway CE1200 Appliance Installation Guide