What to do if Active Options only indicates '150 traversal calls' or '3750 registrations' for large Cisco Server deployments?
To utilize the large-scale capabilities (500 traversal calls and 5000 registrations) of the Cisco Expressway, the CE1100 unit must have an active 10 Gb network connection.
Why does my Cisco expressway ce1100 Server lag during boot up?
The Cisco CE1100 server runs a power characterization test only once when it's first plugged in and powered up. To avoid this lag, disable the test in the CIMC by logging in, navigating to Server > Power Policies > Power Cap Configurations, unchecking the 'Power Characterization at Boot' box, and saving the changes.
Details changes made to the Installation Guide across different versions.
Describes the purpose and content of this installation guide.
Provides background information on the Cisco Expressway CE1100 appliance.
Lists other relevant Cisco Expressway documentation for further information.
Information on available training for Cisco Expressway products and services.
Defines TelePresence terms used within Cisco documentation.
Details the environmental and power requirements for the appliance server.
Instructions for unpacking and preparing the Cisco Expressway CE1100 unit for installation.
Explains how to find the UCS and Application/Software serial numbers for the appliance.
Guidance on physically installing the Cisco Expressway unit into a server rack.
Steps for correctly inserting Small Form-factor Pluggable (SFP) transceivers into the unit.
Instructions for connecting power and initiating the startup sequence for the appliance.
Methods for establishing initial network connection and configuration for the Expressway.
Steps to access and configure the Cisco Expressway using its web-based user interface.
Instructions for configuring the Cisco Expressway via its command-line interface (CLI).
Configuration of essential system settings like name, discovery, and DNS.
Guidance on checking for and performing software updates for the Cisco Expressway.
Identifies and explains the LEDs and physical components on the front and rear of the unit.
Procedure for reinstalling the configuration using the Internal Recovery Partition (IRP).
Addresses known issues and specific problems that may arise with the appliance.
Diagnoses and resolves boot time delays caused by the power characterization test.
Information on how to obtain technical assistance and support for the Cisco Expressway.
Cisco's commitment to accessibility and availability of VPAT for Expressway.
Details on warranty, FCC compliance, and legal disclaimers for the product.
Information regarding Cisco's trademarks and intellectual property.
To Next Page
General
