Cisco expressway ce1100

Contents
Preface 2
Change History 2
Introduction 5
About This Document 5
About the Cisco Expressway Appliance 5
Related Documents 6
Training 6
Glossary 6
Preparing to Install 7
Environmental and Power Specifications 7
Unpacking the Unit and Preparing the Installation 7
Locating Serial Numbers 7
Installation 8
Install the Unit in a Rack 8
How to Insert the SFPs 8
Connect and Power on the Unit 8
Configure 10
Connect to the Cisco Expressway 10
Connect Using the Serial Port 11
Connect Using the KVM Port 12
Connect Using the CIMC Port 12
Remotely Connect to Serial Using the CIMC 13
Configure the Cisco Expressway 13
Use the Web Interface 14
Use the Command Line Interface (CLI) 14
Change Other System Settings 14
Check for Updates and Upgrading 14
Troubleshooting 15
Locating LEDs and Components 15
Front View 15
Rear View 16
Definitions of LEDStates 16
3
Cisco Expressway CE1100 Appliance Installation Guide