CHAPTER 1
New and Changed Carrier Grade NAT Feature
Information
This table summarizes the new and changed information for the Cisco IOS XR Carrier Grade NAT
Configuration Guide for the Cisco CRS Router, and tells you where the features are documented.
•
New and Changed Carrier Grade NAT Features, page 1
New and Changed Carrier Grade NAT Features
Where DocumentedIntroduced/Changed in
Release
DescriptionFeature
Implementing Carrier
Grade NAT on Cisco IOS
XR Software chapter:
1:1 Redundancy, on page
18
Release 5.2.0This feature was
introduced.
CGSE-PLUS 1:1
Redundancy
Implementing Carrier
Grade NAT on Cisco IOS
XR Software chapter:
Back-to-Back
Deployment, on page 18
Release 5.2.0This feature was
introduced.
CGSE-PLUS
Back-to-Back
Deployment
Implementing Carrier
Grade NAT on Cisco IOS
XR Software chapter:
Intelligent Port
Management, on page
18
Release 5.2.0This feature was
introduced.
CGSE-PLUS Intelligent
Port Management
Cisco IOS XR Carrier Grade NAT Configuration Guide for the Cisco CRS Router, Release 5.2.x
OL-32659-01 1