Cisco GRS User Manual

PurposeCommand or Action
exiting or committing the configuration
changes.
•
Use the commit command to save the
configuration changes to the running
configuration file and remain within the
configuration session.
Configuring the Timeout for Netflow Logging
Perform this task to configure the frequency in minutes at which the Netflow-V9 logging templates are to be
sent to the Netflow-v9 logging server.
SUMMARY STEPS
1.
configure
2.
service cgn instance-name
3.
service-type nat44 nat1
4.
inside-vrf vrf-name
5.
external-logging netflowv9
6.
server
7.
timeoutvalue
8.
end or commit
DETAILED STEPS
PurposeCommand or Action
Enters global configuration mode.configure
Example:
RP/0/RP0/CPU0:router# configure
Step 1
Configures the instance named cgn1 for the CGN
application and enters CGN configuration mode.
service cgn instance-name
Example:
RP/0/RP0/CPU0:router(config)# service cgn cgn1
RP/0/RP0/CPU0:router(config-cgn)#
Step 2
Configures the service type keyword definition for
NAT44 application.
service-type nat44 nat1
Example:
RP/0/RP0/CPU0:router(config-cgn)# service-type nat44 nat1
Step 3
Cisco IOS XR Carrier Grade NAT Configuration Guide for the Cisco CRS Router, Release 5.2.x
OL-32659-01 65
Implementing Carrier Grade NAT on Cisco IOS XR Software
Configuring the Policy Functions for the Carrier Grade NAT

Cisco GRS Specifications

General

Brand	Cisco
Model	GRS
Category	Network Router
Language	English