Cisco GRS User Manual

PurposeCommand or Action
Configures the rtsp ALG on the NAT44 instance for server port 5000.
The range is from 1 to 65535. The default port is 554.
alg rtsp [server-port] value
Example:
RP/0/RP0/CPU0:router(config-cgn-nat44)#
alg rtsp server-port 5000
Step 4
The option of specifying a server port) is currently not
supported. Even if you configure some port, RTSP works only
on the default port (554).
Caution
Saves configuration changes.end or commit
Example:
RP/0/RP0/CPU0:router(config-cgn)# end
or
RP/0/RP0/CPU0:router(config-cgn)# commit
Step 5
•
When you issue the end command, the system prompts you to
commit changes:
Uncommitted changes found, commit them before exiting
(yes/no/cancel)?
[cancel]:
◦
Entering yes saves configuration changes to the running
configuration file, exits the configuration session, and returns
the router to EXEC mode.
◦
Entering no exits the configuration session and returns the
router to EXEC mode without committing the configuration
changes.
◦
Entering cancel leaves the router in the current configuration
session without exiting or committing the configuration
changes.
•
Use the commit command to save the configuration changes to the
running configuration file and remain within the configuration
session.
Configuring the PPTP ALG for a NAT44 Instance
SUMMARY STEPS
1.
configure
2.
service cgn instance-name
3.
service-type nat44 nat1
4.
alg pptpAlg
5.
end or commit
Cisco IOS XR Carrier Grade NAT Configuration Guide for the Cisco CRS Router, Release 5.2.x
OL-32659-01 39
Implementing Carrier Grade NAT on Cisco IOS XR Software
Configuring the Policy Functions for the Carrier Grade NAT

Cisco GRS Specifications

General

Brand	Cisco
Model	GRS
Category	Network Router
Language	English