Configuring the Policy Functions for the Carrier Grade NAT 30
Configuring Port Limit per Subscriber 30
Configuring the Timeout Value for the Protocol 32
Configuring the Timeout Value for the ICMP Protocol 32
Configuring the Timeout Value for the TCP Session 33
Configuring the Timeout Value for the UDP Session 35
Configuring the FTP ALG for NAT44 Instance 36
Configuring the RTSP ALG for NAT44 Instance 38
Configuring the PPTP ALG for a NAT44 Instance 39
Configuring the TCP Adjustment Value for the Maximum Segment Size 41
Configuring the Refresh Direction for the Network Address Translation 42
Configuring the Carrier Grade NAT for Static Port Forwarding 44
Configuring the Dynamic Port Ranges for NAT44 46
Configuring 1:1 Redundancy 47
Configuring Multiple Public Address Pools 48
Configuring Port Limit per VRF 50
Configuring Same Address Pool for Different NAT Instances 52
Configuring High Availability of Data Path Service Virtual Interface (SVI) 55
Configuring the Export and Logging for the Network Address Translation Table
Entries 57
Configuring the Server Address and Port for Netflow Logging 57
Configuring the Path Maximum Transmission Unit for Netflow Logging 59
Configuring the Refresh Rate for Netflow Logging 61
Configuring Session-Logging for a NAT44 or DS-Lite Instance 63
Configuring the Timeout for Netflow Logging 65
Configuring the Carrier Grade Service Engine 67
Bringing Up the CGSE Board 67
Configuring IPv4/IPv6 Stateless Translator (XLAT) 69
XLAT ServiceApp Configuration 69
XLAT Instance Configuration 70
Line Card Upgrade 71
UPGRADE FROM_ UBOOT to 559 & MANS FPGA to 0.41014 71
Configuring IPv6 Rapid Development 72
Ping to BR Anycast Address 75
Enable Additional 6rd Features 75
Cisco IOS XR Carrier Grade NAT Configuration Guide for the Cisco CRS Router, Release 5.2.x
OL-32659-01 v
Contents
To Next Page
Loading...
Need help?
General
