Cisco GRS User Manual

PurposeCommand or Action
Configures the external-logging facility for the DS
LITE translation entries that can be logged in syslog
servers to analyze and debug the information.
external-logging syslog
Example:
RP/0/RP0/CPU0:router(config-cgn-ds-lite)#
external-logging syslog
Step 19
Configures the logging server information for the IPv4
address and port for the server that is used for the
syslog based external-logging facility.
server
Example:
RP/0/RP0/CPU0:router(config-cgn-ds-lite-extlog)# server
RP/0/RP0/CPU0:router(config-cgn-ds-lite-extlog-server)#
Step 20
Configures the syslog server address and port number
to use for syslog based external logging facility for
DS LITE instance.
address A.B.C.D port port-number
Example:
RP/0/RP0/CPU0:router(config-cgn-ds-lite-extlog-server)#
address 90.1.1.1 port 514
Step 21
Saves configuration changes.end or commit
Example:
RP/0/RP0/CPU0:router(config-cgn-ds-lite-extlog-server)#
end
Step 22
•
When you issue the end command, the system
prompts you to commit changes:
Uncommitted changes found, commit them
before exiting (yes/no/cancel)?
or
RP/0/RP0/CPU0:router(config-cgn-ds-lite-extlog-server)#
commit
[cancel]:
◦
Entering yes saves configuration changes
to the running configuration file, exits the
configuration session, and returns the
router to EXEC mode.
◦
Entering no exits the configuration
session and returns the router to EXEC
mode without committing the
configuration changes.
◦
Entering cancel leaves the router in the
current configuration session without
exiting or committing the configuration
changes.
•
Use the commit command to save the
configuration changes to the running
configuration file and remain within the
configuration session.
Cisco IOS XR Carrier Grade NAT Configuration Guide for the Cisco CRS Router, Release 5.2.x
80 OL-32659-01
Implementing Carrier Grade NAT on Cisco IOS XR Software
Configuring Dual Stack Lite Instance

Cisco GRS Specifications

General

Brand	Cisco
Model	GRS
Category	Network Router
Language	English