Cisco IOS XE Intelligent Services User Manual

Configuring ISG Accounting
How to Configure ISG Accounting
15
Configuration sources associated with this session:
Service: video1, Active Time = 3 minutes, 46 seconds
show subscriber session Output When ISG Accounting Is Applied to a Session
The following example shows sample output for the show subscriber session command for a session
rather than a flow.
Router# show subscriber session uid 730 detailed
Subscriber session handle: 3800009A, state: connected, service: Local Term
Unique Session ID: 730
Identifier: igq2acct
SIP subscriber access type(s): IP-Interface/Account-Logon-CH
Root SIP Handle: A600000E, PID: 75
Child SIP Handle: F9000018, PID: 73
Current SIP options: Req Fwding/Req Fwded
Session Up-time: 3 minutes, 57 seconds, Last Changed: 2 minutes, 59 seconds
AAA unique ID: 81
Switch handle: 890003A0
Interface: ATM6/0.1
Policy information:
Authentication status: authen
Config downloaded for session policy:
From Access-Type: Account-Logon-CH, Client: SM, Event: Got More Keys
Profile name: apply-config-only, 2 references
ssg-account-info "SAfoo"
Rules, actions and conditions executed:
subscriber rule-map rule1
condition always event any-event
action 1 authenticate
Session inbound features:
Feature: Session accounting
Method List: foo
Outbound direction:
Packets = 10, Bytes = 1000
Session outbound features:
Feature: Session accounting
Method List: foo
Outbound direction:
Packets = 10, Bytes = 1000
Configuration sources associated with this session:
Interface: ATM6/0.1, Active Time = 3 minutes, 58 seconds
Display AAA Subscriber Sessions
Use the show aaa sessions command to display information about AAA subscriber sessions.
SUMMARY STEPS
1. enable
2. show aaa sessions

Cisco IOS XE Intelligent Services Specifications

General

Brand	Cisco
Model	IOS XE Intelligent Services
Category	Gateway
Language	English