Cisco IOS XE Intelligent Services

Configuring ISG Accounting
How to Configure ISG Accounting
16
DETAILED STEPS
Examples
This example shows sample output for the show aaa sessions command:
Router# show aaa sessions
Total sessions since last reload: 141
Session Id: 167
Unique Id: 151
User Name: *not available*
IP Address: 192.168.0.1
Idle Time: 0
CT Call Handle: 0
Display AAA Information for Subscribers
Use the show aaa user command to display information about AAA subscribers.
SUMMARY STEPS
1. enable
2. show aaa user {all | unique id}
DETAILED STEPS
Command or Action Purpose
Step 1
enable
Example:
Router> enable
Enables privileged EXEC mode.
• Enter your password if prompted.
Step 2
show aaa sessions
Example:
Router# show aaa sessions
Displays AAA subscriber session information.
Command or Action Purpose
Step 1
enable
Example:
Router> enable
Enables privileged EXEC mode.
• Enter your password if prompted.
Step 2
show aaa user {all | unique id }
Example:
Router# show aaa users all
Displays AAA subscriber information for all users or a
specified user.
• Valid values for the user ID keyword are
1- 4294967295.